distribution nozzle
英 [ˌdɪstrɪˈbjuːʃn ˈnɒzl]
美 [ˌdɪstrɪˈbjuːʃn ˈnɑːzl]
【化】分配喷嘴
双语例句
- Droplet Size and Droplet Size Distribution of Y-Type Air-Blast Nozzle
Y型气流式喷嘴的雾化滴径和滴径分布 - Prediction of Droplet Size Distribution in Spray of Air-Blast Nozzle Using Maximum Entropy Principle any of several small Indo-Australian freshwater fishes that catch insects by squirting water at them and knocking them into the water.
最大熵原理预测气流式喷嘴雾化液滴粒径分布几种印度-澳大利亚的小淡水鱼，通过将水滴喷向昆虫并击落它们而捕食昆虫。 - Runner plate design with balanced and stable runner as well as even heat distribution: open hot runner nozzle tip for high temperature and high wear-resisting engineering plastics;
流道平衡稳定、热量分布均匀的流道板设计；针对高温高耐磨工程塑料的开放式热流道喷嘴嘴尖； - Design of Distribution Bench for Precision Measuring Spray Nozzle Integrative Performance and on Fan Spray Nozzle; Experimental Research on Precision Measurement of PCB Based on Image Recognition
喷头综合性能精密测试试验台的研制及扇形雾喷头性能研究基于图像识别的印制电路板精密检测实验研究 - The Velocity Distribution Even Coefficient of Vaneless Nozzle Exit and the Volute Coefficient for a VGT
变截面涡轮（VGT）无叶喷嘴出口气流速度均匀系数及蜗壳系数 - The condensed phase particle size distribution affects the combustion chamber and nozzle efficiency of solid rocket motors to some extent.
凝聚相微粒尺寸分布对固体火箭发动机燃烧室效率和喷管效率有影响。 - Laser measuring for the spray droplet distribution of supersonic nozzle by light diffraction
激光衍射法在喷嘴雾化特性测量中的应用研究 - Characteristics of Stress Distribution for Nozzle Reinforcements with a Nozzle Extended Toward Inner Side
内伸式接管补强结构应力分布特点氧氟沙星的不良反应 - In the paper, the characteristics of temperature distribution in ladle nozzle under different conditions are analyzed by simulation on heat transfer.
通过传热数值计算，分析了钢包水口内在不同条件下的温度分布特征。 - Numerical simulation of velocity distribution at scroll nozzle of turbocharger
涡轮增压器蜗壳喷嘴出口速度计算 - The stress analyses were made of the rectangle big-opening nozzles with and without internal elongation on the shell of an internal pressure vessel using 3D finite element method, and the stress distribution law between the nozzle location was derived.
运用三维有限元分析方法，对内压容器壳体上有内伸矩形大开孔接管和无内伸矩形大开孔接管结构进行应力分析，得到了接管部位的应力分布规律。 - Based on the structural design of the centrifugal nozzle, the article gave an experimental study on the atomizing property of particulate size distribution for this kind of nozzle.
在离心式喷嘴结构设计的基础上，对喷嘴粒子尺寸分布的雾化性能进行了试验研究。 - Uniform distribution of cavitation at the nozzle exit section is obtained by increasing length-diameter ratio and leads to the improvement of atomization.
从燃油空穴雾化理论的角度出发，空穴强度的提高以及在出口截面上的均匀分布都有利于燃油的破碎雾化。 - The analysis result indicated that the atomization particle size and atomization particle size distribution of the large aperture swirl nozzle showed specific rules with different flow rates and outlet positions.
试验结果表明，大孔径旋流喷嘴的雾化粒径和雾化粒径分布随流量和流出位置的不同均呈现一定的变化规律； - The transient heat transfer process of the submerged nozzle under two different preheating regimes is studied by CFD of ANSYS and thereupon the temperature field distribution of the nozzle after preheating and its temperature rise curve have been obtained.
运用ANSYS的CFD对浸入式水口两种预热烘烤方式下的瞬态传热过程进行了研究，得到了水口烘烤预热后的温度场分布和水口的升温曲线。 - Influence of heat radiation leakage at exit on wall temperature distribution in extended section of nozzle
喷口辐射热泄漏对延伸段壁温分布的影响 - The measurement of erosion and temperature field in the nozzle hat been made in the test of a solid motor loaded with the aluminized propellant. The data of erosion and temperature distribution in the composite nozzle structure have been obtained.
介绍了含铝复合推进剂发动机试验时，对其喷管进行的烧蚀和温度场测量，获得了复合喷管结构中的烧蚀和瞬时温度分布。 - In this paper, the fuel spray penetration, cone angle and droplet size distribution of a conical nozzle are investigated by using laser technique, qnd the fuel spray characteristics of the conical nozzle are compared with those of multihole nozzles.
本文应用激光技术对伞喷喷油嘴的喷雾贯穿距离、喷雾锥角、喷雾粒径及其分布等进行了研究，并对伞喷喷油嘴与多孔喷油嘴的喷雾特性进行了比较。 - Based on this model, the effects of geometric and structural parameters, such as injection pressure, rear pressure, length-diameter ratio, inlet round angle-radius ratio and non-axis symmetry of nozzle, on the distribution of the cavitation inside the nozzle are analyzed.
基于这一模型进一步分析了喷射压力、背压和喷孔长径比、喷孔入口圆角比、非轴对称喷孔等几何结构参数对喷孔内空穴分布的影响。 - Based on geometry characteristic of the nozzle and the main factor in the procedure of the thermal analysis, the axial symmetry FEM model is established and the temperature distribution of the nozzle is evaluated.
考虑了喷管的几何特性和热分析过程中的主要因素，建立起轴对称的有限元计算模型，计算了喉衬组件与扩张段结构的瞬态温度场。 - The paper introduced the parameter setting method, the water distribution method selection, the structural design of the water distribution device and nozzle arrangement method for the high reliability in-build spray system suitable to the direct-axis roadheader.
介绍了一种适用于纵轴式掘进机的高可靠性内喷雾系统的参数确定方法，配水方式的选择、配水装置的结构设计及喷嘴的排布方法。 - The temperature distribution of the nozzle guide vanes are affected greatly by the flow and heat transfer of the internal cooling passages.
涡轮叶片内部冷却特性直接影响到叶片的壁面温度分布，必须对其展开详细的研究。 - Wall temperature distribution for axisymmetric vectoring exhaust nozzle ( AVEN) has been computed by means of closure cavity theoretic algorithm and numerical computation of internal 3D flow field in AVEN.
采用封闭腔理论算法，利用矢量喷管的三维内流场数值计算结果，对轴对称矢量喷管的壁温分布进行了数值计算。 - Numerical Study of Temperature Distribution on Vectored Nozzle Wall
矢量喷管壁温分布的数值计算研究 - Experimental research of atomization property of particle size distribution of swirl nozzle
离心式喷嘴粒子尺寸分布的雾化特性试验研究 - The effects of fuel spray distribution of injection nozzle, number of nozzle holes and opening pressure of nozzle needle valve on the performance of stratified combustion methanol engine were studied on a 1130 single cylinder diesel engine.
针对1130单缸柴油机研究了喷油嘴油线分布、喷油嘴孔数和喷油嘴针阀开启压力对分层燃烧甲醇发动机性能的影响。 - Through the experiments with water model of 1:2 ratio, different flowing distribution resulted from different nozzle structures and technological parameters in 760mm × 460mm × 120mm profiled blank mould in Ma Anshan Iron& Steel Co.
通过1：2异型坯水模型实验，研究了马钢760mm×460mm×120mm异型坯结晶器在不同水口结构、不同工艺参数条件下的流场。 - The cavitation flow in a nozzle at steady spray of a diesel engine was simulated, and the formation mechanism and distribution of cavitation inside the nozzle were analyzed using mixed multiphase flow model coupled with cavitation model.
利用混合多相流体模型加空穴模型的方法，模拟了柴油机孔式喷油嘴稳定喷射时嘴内的空穴流动现象，分析了空穴在喷油嘴内形成机理及其分布情况。 - To investigate factors influencing spraying performances, droplet diameter distribution, nozzle discharge and spray distribution on vertical planes were measured on air-assisted spraying experiment equipment.
为研究各因素对喷雾性能的影响，在风送喷雾试验台上进行雾滴直径分布、喷头流量测定以及垂直面内雾量分布试验。 - We calculated the size of the spray cone angle, flow field structure and velocity distribution of the nozzle through VOF two-dimensional numerical simulation.
通过二维VOF数值模拟计算了可视化离心喷嘴雾化锥角大小、流场结构以及速度分布等。